PT Cruiser L4-2.4L (2008)
8. Disconnect the electrical connectors (2) between the SCCM (1) and the instrument panel wiring harness at the base of the SCCM and remove from
column.
NOTE: If only removing the SCCM from column, there is no need to continue to next step.
DISASSEMBLY
1. Remove the left multi-function switch stalk retaining screw (2).
2. Pull the left stalk out of the SCCM.
3. Disconnect the left stalk electrical connector.
4. Separate the left switch from the SCCM.
