PT Cruiser L4-2.4L (2008)
6. The bottom loop can be twisted off, but is used mainly to line up the other two for assembly. It is identifiable by the conical shape of the loop (1).
This must be at the bottom of the steering wheel upon assembly.
7. Once released, disconnect the two airbag squibs (2), the one speed control connector (4 and 5), and remove the driver airbag from the steering
wheel (1).
WARNING: When replacing a deployed driver airbag, THE CLOCKSPRING MUST BE REPLACED See: Accessories and Optional
Equipment/Steering Mounted Controls Communication Module/Service and Repair/Removal.
Driver Airbag - Installation
INSTALLATION
WARNING: When replacing a deployed driver airbag, THE CLOCKSPRING MUST BE REPLACED See: Accessories and Optional
