PT Cruiser L4-2.4L (2008)
3. Connect the tensioner squib connector (1).
4. Install the Lower Quarter Trim Panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel
Trim/Installation - Convertible.
5. Install the upper turning loop retaining bolt (1). Tighten bolt to 40 Nm (30 ft. lbs.).
6. Place seat belt webbing anchor (3) into position on the seat cushion frame (4) and install the bolt (2). Tighten bolt to 47 Nm (34.5 ft. lbs.).
7. Install the side shield/cover (1) to the seat belt anchor (3).