PT Cruiser L4-2.4L (2008)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat See: Service and Repair/Power Seat Switch - Removal.
3. Use an ohmmeter to test the continuity of the power seat switch. Refer to POWER SEAT SWITCH CONTINUITY table. If not OK, replace the
faulty power seat switch. If switch tests OK See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures.