PT Cruiser L4-2.4L (2008)
Seat Heater Switch: Description and Operation
Description
DESCRIPTION
The heated seat switches are located in the center stack (2) of the instrument panel. The switches are located on the outer edges of the accessory switch
bank (1). If either of the switches is damaged or inoperative the complete accessory switch bank assembly must be replaced.
Each heated seat switch provides a resistor-multiplexed signal to the Cab Compartment Node (CCN). Amber Light Emitting Diodes (LEDs) in the top
portion of each switch indicate the level of heat in use: Two LEDs are illuminated for high, one for low, and none for off. Pressing the switch once will
select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements
off.
The LED indicator lamps in each heated seat switch cannot be repaired. If the LED lamps are inoperative or damaged, or the switch is inoperative or
damaged the complete switch pod assembly must be replaced.
