PT Cruiser L4-2.4L (2008)
Ignition Switch Lock Cylinder: Service and Repair
Housing-Lock Cylinder
Removal
REMOVAL
1. Access and remove the Steering Column Control Module (SCCM) (3) from the steering column (2). See: Accessories and Optional
Equipment/Steering Mounted Controls Communication Module/Service and Repair/Removal
2. Remove the column wiring harness routing clip from the bottom of the lock cylinder housing.
3. If the vehicle is equipped with an automatic transaxle, disconnect the ignition shift interlock cable at the steering column. To do this, depress the
tab on the cable connector (3) and remove the cable from the steering column ignition cylinder housing (1).