PT Cruiser L4-2.4L (2008)
Fuse Block: Service and Repair
Installation
INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO RESTRAINT SYSTEMS BEFORE ATTEMPTING ANY
STEERING COLUMN OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER
PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
1. Install the new wire harness and fuse block.
2. Re-trim the instrument panel with what was necessary for harness removal.
3. Install instrument panel into vehicle See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel - Installation.
Ensure that the wire terminals and connectors are in good condition and connectors are properly installed.
4. Connect the battery negative cable.
