PT Cruiser L4-2.4L (2008)
10. Install the wheel speed sensor (1) with heat shield (2) on the knuckle (4). Install the mounting screw (5) and tighten it to 12 Nm (105 in. lbs.).
11. Install the brake rotor, disc brake caliper and adapter. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Installation
12. Clean all foreign matter from the threads of the halfshaft outer C/V joint (5).
13. Install the washer (6) and hub nut (3) on the end of the halfshaft (5) and snug it.
14. While a helper applies the brakes to keep the hub (4) from rotating, tighten the hub nut (3) to 244 Nm (180 ft. lbs.).
15. Install the spring washer (3), and lock nut (7) over the hub nut. Insert the cotter pin (1) through the notches in the lock nut and hole in halfshaft.
16. Wrap the cotter pin (1) ends tightly around the lock nut (2).
