PT Cruiser L4-2.4L (2008)
13. Disconnect the wiring connectors from the A/C compressor (1).
14. Remove the four bolts fastening the A/C compressor (1) to the engine, then move the compressor toward the center of the vehicle, allowing the
compressor to settle in place.
15. From below, place a crowfoot wrench on a long extension onto the pressure hose tube nut (3) at the pump.
16. Place a shop towel between the crowfoot and the pump pulley (1) to avoid slipping and possibly damaging the pulley.
17. Unthread the tube nut from the pump (1).
18. Remove the power steering pressure hose from the vehicle.
Return Hose - 2.4L
2.4L
NOTE: Before proceeding, See: Service Precautions.
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
