PT Cruiser L4-2.4L (2008)
should be a clocking donut (6) (foam sleeve) on the hose to preset this distance.
17. LHD - Attach the power steering fluid pressure hose (4) to its port on the power steering gear. While making sure the hose is not in contact with
any vehicle components (see preceding caution), tighten the pressure hose tube nut at the gear to 31 Nm (23 ft. lbs.).
18. RHD - Attach the power steering fluid pressure hose (3) to its port on the power steering gear (5). While making sure the hose is not in contact
with any vehicle components (see preceding caution), tighten the pressure hose tube nut at the gear to 31 Nm (23 ft. lbs.).
19. Lower the vehicle.
20. Fill and bleed the power steering system. See: Power Steering Bleeding/Service and Repair
21. Check for leaks at all hose connections.
Return Hose - 2.4L
2.4L
