PT Cruiser L4-2.4L (2008)
5. Fill cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
6. Pressurize cooling system to 103 Kpa (15 psi) with pressure tester and check water pump shaft seal and O-ring for leaks.
7. Install rear timing belt cover and camshaft sprockets See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Belt/Service and
Repair/Timing Belt & Sprockets - Installation.
8. Install timing belt See: Engine, Cooling and Exhaust/Engine/Timing Components/Timing Belt/Service and Repair/Timing Belt & Sprockets -
Installation.
Power Steering Pump - Removal
2.4L
NOTE: Before proceeding, See: Service Precautions.
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
3. Remove the wheel mounting nuts (3), then the right front tire and wheel assembly (1).
4. Remove the one fastener (2) securing the wheel house splash shield (1) to the drive belt splash shield (3).
