PT Cruiser L4-2.4L (2008)
11. Turbo engine vehicles - Back out the tube nut (3) securing the pressure hose to the gear.
12. Turbo engine vehicles - Open the routing clip (2) and remove the pressure hose from the clip and gear.
13. Turbo engine vehicles - Remove the return hose clamp (4), then remove the return hose at the power steering gear outlet port fitting.
14. On vehicles equipped with crossmember mounted power steering fluid coolers:
a. Remove the cooler tube from the right routing clip on the gear.
b. Remove the two screws securing the cooler (2) to the front suspension crossmember. Allow the cooler to hang out of the way.
15. Remove the mounting nuts (1, 3), then the pencil strut (2) from the right front corner of the crossmember and body of the vehicle. Remove the
washer (4) behind the strut from the torque strut (5) bolt.
