PT Cruiser L4-2.4L (2008)
2. Position the strut assembly (3) in the strut coil spring compressor (5) following the manufacturers instructions. Set the lower hooks (1). Position
the strut clevis bracket (4) straight outward, away from the compressor. Place a clamp (2) on the lower end of the coil spring, so the strut is held in
place once the strut shaft nut is removed.
3. Lower the upper hooks (3) and set them on the coil spring following the manufacturers instructions.
4. Compress the coil spring until all coil spring tension is removed from the upper mount (2).
