PT Cruiser L4-2.4L (2008)
4. Remove the two bolts (3) on the axle trailing arm securing the parking brake cable (1) and routing brackets to the axle trailing arm (2).
5. Move the parking brake cable (1) from its mounted position away from the bottom of the trailing arm bushing and the forward bracket.
6. Remove the bolt (7), nut (1) and washer (2) securing the watts link bell crank (9) to the center of the axle (11).
7. Position a transmission jack or equivalent under the center of the axle raising it just enough to support the axle.
8. Using an awl (2), scribe a line (1) marking the location of one axle trailing arm bracket (3), side-to-side and front-to-rear, on the body of the
vehicle. Perform this for the bracket on the opposite side of the vehicle as well.
