PT Cruiser L4-2.4L (2008)
3. Adjust gearshift cable as follows:
a. Place gearshift lever in the PARK (P) position.
b. Loosen shift cable adjustment screw (1).
c. Move transaxle manual lever to the PARK. Verify transaxle is in PARK by attempting to roll vehicle in either direction.
d. Tighten shift cable adjustment screw to 8 Nm (70 in. lbs.) torque.
4. Verify proper cable adjustment. Engine should start with the shifter lever in PARK (P) and NEUTRAL (N) positions ONLY.
5. Install center console assembly (1).
