PT Cruiser L4-2.4L (2008)
Clutch Release Bearing: Service and Repair
Installation
INSTALLATION
WARNING: Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not
contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt
can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing
and disposing of dust and debris
1. The pivot ball pocket in the lever, as well as the lever arms should be lubricated with grease prior to installation.
2. Assemble the lever to the bearing. The small pegs on the bearing must go over the lever arms.
3. Slide the bearing (1) and lever assembly (2) onto the input shaft bearing retainer, as a unit.
4. Snap the clutch release lever onto the pivot ball.
5. Reinstall transaxle assembly. See: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Manual Transmission/Transaxle
- Installation
