PT Cruiser L4-2.4L (2008)
Pressure Plate: Service and Repair
Removal
REMOVAL
Modular Clutch Assembly-Typical
WARNING: Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not
contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt
can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing
and disposing of dust and debris
1. Remove transaxle (3) from vehicle. See: Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Manual
Transmission/Transaxle - Removal
2. Remove modular clutch assembly (1) from transaxle input shaft.
