PT Cruiser L4-2.4L (2008)
Flywheel: Service and Repair
Installation
INSTALLATION
WARNING: Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not
contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt
can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing
and disposing of dust and debris
1. Clean the surfaces of the flywheel and pressure plate to make certain that all oil, grease, and rust have been removed.
2. Install and torque the flywheel-to-crankshaft bolts to 95 Nm (70 ft.lbs.).
3. Install clutch pressure plate and disc .
4. Install transaxle assembly.
