PT Cruiser L4-2.4L (2008)
Selector Shaft: Service and Repair
Shift Crossover Shaft
Removal
REMOVAL
1. Disassemble transaxle.
2. With the transaxle disassembled, remove the crossover shaft seal.
3. Using snap-ring pliers, remove the snap ring (3) at the crossover shaft bore.
4. Push the crossover shaft (2) in the case and remove the crossover assembly.
Installation
INSTALLATION
1. Install crossover shaft to case and install snap ring (3).
2. Install the crossover shaft seal.
3. Assemble transaxle.