PT Cruiser L4-2.4L (2008)
Clutch Pedal Position Sensor / Switch: Service and Repair
Installation
LHD
NOTE: Proper switch harness routing is critical to switch durability. Note the harness routing and location of fasteners intended to keep wires
from contacting pedals.
1. Install switches (1,2) into the pedal bracket assembly. Route harness as was prior to removal.
2. Install clutch and brake pedals to pedal bracket, and install pivot shaft and nut. Torque pivot shaft nut to 42 Nm (31 ft. lbs.).
3. Install brake/clutch pedal bracket assembly (1) into position. Install and tighten brake booster mounting nuts to 34 Nm (300 in. lbs.). Install and
tighten pedal bracket-to-instrument panel nuts to 34 Nm (300 in. lbs.).