PT Cruiser L4-2.4L (2008)
Wiper Arm: Service and Repair
Wiper Arms - Installation
Front
INSTALLATION
Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arms so that the tip of the driver's blade and
the middle of the passenger's blade is on the park line on the windshield. Refer to Adjustments for Wiper Arm Adjustment.
1. Place the arm on the pivot while the arm is in an over/centered position.
2. Install the wiper arm retaining nut and torque to 21 Nm (190 in. lbs.).
3. Install the wiper arm nut cap.
4. Close hood.
Rear
INSTALLATION
Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arm so that the tip of the blade is on the
park line on the windshield.
NOTE: Blade should be parked along bottom rear window defogger grid line. Vertical tick mark shows park tolerance.
1. Install the arm on the pivot and position to tick mark.
