PT Cruiser L4-2.4L Turbo (2009)
![background image](/chrysler/pt_cruiser/l4-2.4l_turbo/Page-2543001.png)
Front Door Window Motor: Service and Repair
Window Regulator Motor - Removal
REMOVAL
1. Move the window to the full UP position position, if possible.
2. Disconnect and isolate the battery negative cable.
3. Remove door trim panel See: Front Door Panel/Service and Repair/Front Door Trim Panel - Removal.
4. Disconnect electrical harness connector from motor.
5. Remove window regulator.
6. With regulator on bench, remove three screws retaining the motor to the regulator and remove motor.