PT Cruiser L4-2.4L Turbo (2009)
CAUTION: Before installing the ABM harness connector on the ABM, be sure the seal is properly installed in the connector.
7. Insert the ABM harness connector (2) into the socket of the ABM (1) and close the cover, locking the connector in place.
8. Connect the right front (1), left rear (2) and right rear (3) chassis brake tubes to their respective outlet ports on the ICU HCU (4). Using a crow
foot wrench on a torque wrench, tighten the four tube nuts to 17 Nm (145 in. lbs.).