PT Cruiser L4-2.4L Turbo (2009)
Thermostat: Service and Repair
Engine Coolant Thermostat - Removal
2.0L/2.4L ENGINE
1. Remove upper intake manifold See: Engine/Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Removal.
2. Partially drain cooling system below the thermostat level.
3. Disconnect upper radiator hose from outlet connector (2).
4. Disconnect coolant recovery system hose from outlet connector.
5. Turbocharger equipped vehicles:
-
Remove fastener securing A/C suction line support bracket to coolant outlet connector stud.
-
Unclip A/C suction line support bracket from A/C suction line. Reposition bracket.
6. Remove coolant outlet connector bolts.
7. Remove thermostat assembly, and clean sealing surfaces.