PT Cruiser L4-2.4L Turbo (2009)
4. Naturally Aspirated Engine: Install lower intake manifold. Tighten fasteners to 12 Nm (105 in. lbs.) in sequence shown in.
5. Turbocharged Engine: Install lower intake manifold. If equipped with an aluminum manifold, tighten fasteners to 28 Nm (250 in. lbs.) in
sequence shown. If equipped with a plastic manifold, tighten fasteners to 12 Nm (105 in. lbs.) in sequence shown.
6. Turbocharger Equipped Engine: Install fasteners for lower intake manifold support bracket (3). If equipped with an aluminum manifold, torque
fasteners to 54 Nm (40 ft. lbs.). If equipped with a plastic manifold, torque manifold fasteners to 6 Nm (55 in. lbs.).
7. If removed, install the fuel rail assembly to intake manifold. Tighten screws to 23 Nm (200 in. lbs.).
8. Connect fuel injector wiring harness.
9. Inspect quick connect fittings for damage, replace if necessary See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair. Lubricate tube with clean engine oil. Connect fuel supply hose to fuel rail assembly. Check connection by pulling on
connector to insure it locked into position.