PT Cruiser L4-2.4L Turbo (2009)
12. Install radiator upper hose (1).
13. Install upper intake manifoldSee: Intake Manifold - Installation.
14. Connect negative cable to battery (1).
15. Fill the cooling system.
16. With the DRBIII(R) scan tool use ASD Fuel System Test to pressurize system to check for leaks.
CAUTION: When using the ASD Fuel System Test, the Auto Shutdown (ASD) relay will remain energized for 7 minutes or until the ignition
switch is turned to the OFF position, or Stop All Test is selected.
17. Start engine and check for leaks.
Upper
UPPER INTAKE MANIFOLD
Non-Turbo