PT Cruiser L4-2.4L Turbo (2009)
7. Remove gear cover retaining stud (1) (double ended to also retain chain guide). Remove cover (6) and balance shaft gears (5).
8. Remove rear cover (1) and balance shafts (3).
9. Remove four carrier to crankcase attaching bolts to separate carrier from engine bedplate.
BALANCE SHAFT CARRIER
The following components will remain intact during carrier removal: Gear cover (6), gears (5), balance shafts and the rear cover.
1. Drain engine oil.
2. Remove the oil pan and pick-up tube See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan - Removal.