chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Relays and Modules - Steering and Suspension > < Wheel Alignment|Page 5204
Page 2
background image

3. When measuring, maximum left-to-right differential is not to exceed 10 mm (0.39 in.).
4. Compare the measurements to specifications listed in the following CURB HEIGHT SPECIFICATIONS chart.

5. If curb height is found to be out of specification and there is no sign of excessive body damage, curb height can be changed by replacing the

applicable spring with a spring offering a different check load. See: Suspension/Suspension Strut / Shock Absorber/Service and Repair/Removal
and Replacement/Front Strut / Shock/Removal See: Suspension/Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil
Spring(s) - Removal 

CURB HEIGHT SPECIFICATIONS

Relays and Modules - Steering and Suspension > < Wheel Alignment|Page 5204