PT Cruiser L4-2.4L Turbo (2009)
4. Install the left stalk switch retaining screw.
INSTALLATION
1. Position the SCCM (3) over the steering column shaft (2).
2. Install the three screws (1).
3. Connect the electrical connectors (2) to the instrument panel harness, ensure wiring is properly routed. Then check that the connectors, locking
tabs are properly engaged.
4. Install steering column shrouds See: Steering Column/Steering Column Cover/Service and Repair/Steering Column Shroud - Installation. Be sure
all wires are inside of shrouds.
5. Install steering wheel ensuring the flats on hub align with the clockspring See: Steering Wheel/Service and Repair/Installation. Pull the airbag
leads through the larger slot. Ensure leads do not get pinched under the steering wheel.