PT Cruiser L4-2.4L Turbo (2009)
8. Install Wrench (2), Special Tool 10087-2, over the inner tie rod and onto Socket (1) 10087-5.
9. Using a ratchet in the square drive on the rear of Wrench 10087-2, unthread and remove the inner tie rod from the steering gear.
10. Make sure the travel restrictor (1) is removed along with the inner tie rod.
Outer Tie Rod
OUTER TIE ROD
1. Raise and support the vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).