PT Cruiser L4-2.4L Turbo (2009)
tighten the bolt at this time.
2. Raise or lower the jack as necessary until the shock absorber lower mounting bolt (5) can be inserted through the axle flange and the shock
absorber lower mounting eye.
3. Install the washer (6) and nut (7) on the lower mounting bolt (5). Tighten the lower mounting bolt to 88 Nm (65 ft. lbs.).
4. Tighten the upper shock absorber mounting bolt (1) to 99 Nm (73 ft. lbs.).
5. Remove the jack.
6. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
7. Lower the vehicle.