PT Cruiser L4-2.4L Turbo (2009)
3. Lower the upper hooks (3) and set them on the coil spring following the manufacturers instructions.
4. Compress the coil spring until all coil spring tension is removed from the upper mount (2).
CAUTION: Never use impact or high speed tools to remove the strut shaft nut. Damage to the strut internal bearings may occur.
5. Once the spring is sufficiently compressed, install Strut Nut Wrench (2), Special Tool 6864, on the strut shaft retaining nut. Next, install a socket
on the hex on the end of the strut shaft. While holding the strut shaft from turning, remove the nut from the strut shaft.