chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Accumulator - Description|Page 3466 > < Transmission Solenoid and Pressure Switch Assembly - Removal|Page 3461
Page 1
background image

Accumulator: Description and Operation
Accumulator - Description

DESCRIPTION

The 41TE underdrive, overdrive, low/reverse, and 2/4 clutch hydraulic circuits each contain an accumulator. An accumulator typically consists of a
piston (2), seal rings (3) return spring(s) (1) and a cover or plug. The overdrive and underdrive accumulators are located within the transaxle case, and
are retained by the valve body. 

The low reverse accumulator (1) is also located within the transaxle case, but the assembly is retained by a cover and a snap-ring.

Accumulator - Description|Page 3466 > < Transmission Solenoid and Pressure Switch Assembly - Removal|Page 3461