PT Cruiser L4-2.4L Turbo (2009)
9. Loosen master cylinder pushrod adjustment screw (1).
10. Connect clutch master cylinder rod to clutch pedal pin. An audible "click" should be heard. If damaged, replace nylon retainer.
11. Adjust clutch pedal position. Gently lift upward on clutch pedal. Tighten adjustment screw to 6 Nm (55 in. lbs.) torque.
12. Install brake booster into position. Connect push rod to brake pedal pin (1).
13. Install and torque brake booster-to-cowl panel nuts (2) to 34 Nm (300 in.lbs.). Install push rod retaining clip (1).