PT Cruiser L4-2.4L Turbo (2009)
Wiper Arm: Service and Repair
Wiper Arm - Removal
Front
REMOVAL
1. Place the wiper arm/blades in the PARK position and turn ignition OFF.
2. Open hood.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the wiper arm nut cap and remove.
4. Remove wiper arm retaining nut.
5. Remove the arm from the pivot using a rocking motion while the arm is in an over/centered position.
6. Clean metal splinters OFF the pivot shafts.
Rear
REMOVAL
1. Remove the rear wiper arm nut cap.
2. Remove wiper arm retaining nut.