PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Driver/Vehicle Information Display: Testing and Inspection
Radio Frequency Detector
If the Universal Transmitter is inoperative, retrain the universal transmitter with a known good transmitter for the proper procedure. Test the universal
transmitter operation again. If the unit is still inoperative, test the universal transmitter with Radio Frequency Detector special tool as described below:
1. Turn the Radio Frequency (RF) Detector ON. A "chirp" will sound and the green power LED will light. If the green LED does not light, replace
the battery.
2. Hold the RF detector within one inch of the TRAINED universal transmitter and press any of the transmitters buttons.
3. The red signal detection LEDs will light and the tool will beep if a radio signal is detected. Repeat this test for all three transmitter buttons. If the
tool does not detect a radio signal for any of the three buttons, replace the inoperative universal transmitter assembly.