chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Towing Hook / Bracket > < Ultrasonic Sensor, Antitheft|Locations|Page 7352
Page 1
background image

Towing Information: Service and Repair

WARNING:  DO NOT ALLOW TOWING ATTACHMENT DEVICES TO CONTACT THE FUEL TANK OR LINES, FUEL LEAK CAN
RESULT. DO NOT LIFT OR TOW VEHICLE BY FRONT OR REAR BUMPER, OR BUMPER ENERGY ABSORBER UNITS. DO NOT
VENTURE UNDER A LIFTED VEHICLE IF NOT SUPPORTED PROPERLY ON SAFETY STANDS. DO NOT ALLOW PASSENGERS TO
RIDE IN A TOWED VEHICLE. USE A SAFETY CHAIN THAT IS INDEPENDENT FROM THE TOWING ATTACHMENT DEVICE
.

CAUTION:  Do not damage brake lines, exhaust system, shock absorbers, sway bars, or any other under vehicle components when attaching towing
device to vehicle. Do not attach towing device to front or rear suspension components. Do not secure vehicle to towing device by the use of front or rear
suspension or steering components. Remove or secure loose or protruding objects from a damaged vehicle before towing. Refer to state and local rules
and regulations before towing a vehicle. Do not allow weight of towed vehicle to bear on lower fascia, air dams, or spoilers.

Recommended Towing Devices

To avoid damage to bumper fascia and air dams use of a wheel lift or flat bed towing device is recommended. When using a wheel lift towing device, be
sure the unlifted end of disabled vehicle has at least 100 mm (4 in.) ground clearance. If minimum ground clearance cannot be reached, use a towing
dolly. If a flat bed device is used, the approach angle should not exceed 15 degrees.

Towing Hook / Bracket > < Ultrasonic Sensor, Antitheft|Locations|Page 7352