PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Rear Bumper Cover / Fascia: Service and Repair
REAR BUMPER FASCIA
REMOVAL
1. Open liftgate.
2. Remove the rubber body plugs or mastic tape patches, if equipped.
3. Remove nuts attaching fascia to lower floor closure.
4. Raise vehicle on hoist.
5. Disconnect license lamp.
6. Remove splash shield from fascia in the wheel opening area.
7. Remove screws attaching fascia to lower quarter panels.
8. Remove fascia from vehicle.
INSTALLATION