PT Cruiser L4-2.4L Turbo VIN 8 (2005)
1. Using a fork-type prying tool, disengage push in fasteners attaching sill secondary weatherstrip to door.
2. Remove weatherstrip from door.
INSTALLATION
1. Position weatherstrip to door.
2. Press sill secondary weatherstrip fasteners into position.
Front And Rear Door Upper Secondary Weatherstrip
FRONT AND REAR DOOR UPPER SECONDARY WEATHERSTRIP
REMOVAL
1. Open the front/rear door.
2. Using a wide blade flat tool, unseat the push pin at the base of the "A" pillar.
3. Pull the weatherstrip off the vehicle.
INSTALLATION
1. Clean off any remain butyl residue on the body.
2. Push seal into position under the quarter window glass and along the door opening.
3. Locate the push pins at the base of the "A" pillar and push into place.
4. Install the remainder of the seal.