PT Cruiser L4-2.4L Turbo VIN 8 (2005)
2. Remove door speaker, if equipped.
3. Remove front lift guide.
4. Remove bolt attaching top of front guide bar to inner door panel.
5. Using a Snap-on(R) flare-nut socket (FRXM10) and a hex wrench, remove nut attaching bottom of guide bar to door panel while holding jack
screws.
INSTALLATION
1. Install nut attaching bottom of guide bar to door panel.
2. Install bolt attaching top of front guide bar to inner door panel.
3. Install front lift guide.
4. Install door speaker, if equipped.
5. Verify door glass alignment, adjust if necessary.
6. Install door trim panel and water dam.
Door Glass Inner Belt Stabilizer - Convertible
DOOR GLASS INNER BELT STABILIZER - CONVERTIBLE
REMOVAL
1. Remove door trim panel.
2. Remove nut attaching inner belt stabilizer to door panel.
3. Remove inner belt stabilizer from door.
INSTALLATION
1. Place inner belt stabilizer into position.
2. Install nut attaching inner belt stabilizer to door panel. Adjust inner belt stabilizer against glass with enough tension to allow free up and down
movement.
3. Install door trim panel.