PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Trunk / Liftgate Lock: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove liftgate trim panel.
3. Disconnect motor wire harness connector.
LiftGate Lock Motor
4. Remove liftgate lock motor from liftgate by gently unsnapping.
INSTALLATION
1. Install liftgate lock motor on the liftgate.
2. Install motor wire harness connector.
3. Install the liftgate trim panel.
4. Connect the battery negative cable.