PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Tension Cable Spring
10. Install tension cable with two spring clips on each side.
11. Install canopy adhesive tape to the front header edges.
Top Cover Front Header
12. Install 12 screws attaching Canopy to front header.
13. Operate the folding top assembly to ensure proper operation and fit.
Opening Trim Lace
REMOVAL
1. Remove lace by starting at the joint center of the opening on driver's side.
2. Pull one end of the lace away from the headliner until the entire lace is removed.
INSTALLATION
1. Place trim lace into position starting at center of the opening on driver's side.
2. Push lace into position.
3. Ensure that the corner radii is fully engage.
4. Once trim lace is attached to sunroof module begin tucking the headline under the lip on the trim lace working all the way around the opening.
