PT Cruiser L4-2.4L Turbo VIN 8 (2005)
3. Remove C-pillar upper trim panel from vehicle.
INSTALLATION
1. Place C-pillar trim panel (1) in position.
2. Push clips on trim panel into slots in upper C-pillar panel (1).
3. Install bolt attaching seat belt turning loop. Tighten seat belt turning loop attaching bolt to 40 N.m (30 ft. lbs.).
D-Pillar Trim
UPPER D-PILLAR TRIM
REMOVAL
1. Disengage clips attaching trim to D-pillar and quarter trim.
2. Remove upper trim panel from vehicle.
INSTALLATION
1. Place D-pillar trim panel in position.
2. Push clips on trim panel into slots in upper D-pillar panel and slots in the quarter trim.
Lower Quarter Trim Panel
LOWER QUARTER TRIM PANEL
REMOVAL
1. Remove C-pillar and D-pillar trim.
2. Remove liftgate sill scuff plate.
