PT Cruiser L4-2.4L Turbo VIN 8 (2005)
Door Lock Cylinder: Procedures
Front Door Lock Cylinder
REMOVAL
1. Remove door trim panel and water dam.
2. Raise door glass.
3. Disconnect door lock rod from latch.
4. Disengage wiring from lock cylinder if so equipped.
5. Remove fasteners attaching lock cylinder retainer to door.
6. Remove lock cylinder retainer.
7. Pull lock cylinder from door handle.
INSTALLATION
1. Place lock cylinder and gasket into door outer panel.
2. Install cylinder retainer to door.
3. Connect door lock rod from latch.
4. Engage wiring connectors, if equipped.
5. Install door trim panel and water dam.
Front Door Lock Cylinder PT-27
REMOVAL
1. Remove door trim panel and water dam.
2. Raise door glass.
Door Hardware
3. Disconnect door lock rod from latch.
4. Disengage wiring from lock cylinder if so equipped.
5. Remove fasteners attaching lock cylinder retainer to door.
6. Remove lock cylinder retainer.
7. Pull lock cylinder from door handle.
INSTALLATION
1. Place lock cylinder and gasket into door outer panel.
2. Install cylinder retainer to door.
3. Connect door lock rod from latch.
4. Engage wiring connectors, if equipped.