chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Procedures|Page 8194 > < Procedures|Page 8189
Page 1
background image

Sunroof / Moonroof Windguard: Procedures

REMOVAL

1. Fully open sunroof glass panel.

Sunshade

2. Remove two screws attaching wind deflector straps to front crossmember.
3. Rotate wind deflector into the vertical, 90 degree to the roof.
4. Push wind deflector arms down and rearward to disengage arms from spring hooks.
5. Remove wind deflector.

INSTALLATION

1. Place wind deflector in position 90 degree to roof.
2. Push arms down and forward to engage spring hooks.
3. Rotate wind deflector forward into correct position. Depress wind deflector down onto front crossmember to check spring function.
4. Install two screw attaching wind deflector straps to front crossmember. Tighten screws to 1 N.m (9 in.lbs.) torque.

Procedures|Page 8194 > < Procedures|Page 8189