PT Cruiser L4-2.4L Turbo VIN 8 (2005)
6. Remove door sill trim plate. Refer to Trim Panel.
7. Remove the two screws (2) that secure each side of the header and A-pillar weatherstrip (3) to the top of the windshield opening frame (1).
8. Remove the push-pin retainer (4) that secures the header and A-pillar weatherstrip to each side of the windshield opening frame.
9. Carefully remove the header and A-pillar weatherstrip from the header retainer, A-pillar retainers and each door opening flange.
INSTALLATION
1. Position the header and A-pillar weatherstrip (3) to the header retainer located on the top of the windshield opening frame (1).
2. Install the two screws (2) that secure each side of the header and A-pillar weatherstrip to the top of the windshield opening frame. Tighten the
screws to 2.2 N.m (20 in. lbs.).
3. Install the header and A-pillar weatherstrip to the A-pillar retainers located on each side of the windshield opening frame.
4. Install the push-pin retainer (4) that secures each side of the header and A-pillar weatherstrip to the windshield opening frame.
5. Install the header and A-pillar weatherstrip to each door opening flange.
6. Install the door sill trim plate.
