PT Cruiser L4-2.4L Turbo VIN 8 (2005)
NOTE: Inspect disc brake shoes before installation.
1. Install the brake rotor over the studs on the hub.
2. Install the disc brake caliper and adapter assembly over the brake rotor.
3. Install the mounting bolts securing the caliper adapter to the steering knuckle (Fig. 128). Tighten the bolts to a torque of 104 Nm (77 ft. lbs.).
4. Install the tire and wheel assembly. Tighten the wheel mounting nuts to a torque of 135 Nm (100 ft. lbs.).
5. Lower the vehicle.
6. Pump the brake pedal several times before moving the vehicle to set the shoes to the brake rotor.
7. Road test the vehicle and make several stops to seat the brake shoes to the rotor.
INSTALLATION - REAR BRAKE ROTOR
CAUTION: When installing new brake components, be sure to use correct parts. Parts designed for BR4 Performance Brake System must not be
mixed with other brake systems. These parts, similar in appearance, can be easily identified (Fig. 119).
NOTE: Inspect disc brake shoes and parking brake shoes before installation.
1. Install the rear brake rotor over the wheel mounting studs and onto the hub (Fig. 21).
2. Install rear disc brake caliper and shoes.
3. Install the tire and wheel assembly. Tighten the wheel mounting nuts to a torque of 135 Nm (100 ft. lbs.).
4. Adjust the parking brake shoes as necessary.
5. Lower the vehicle.
6. Pump the brake pedal before moving the vehicle to set the brake shoes to the brake rotor.
