PT Cruiser L4-2.4L Turbo VIN 8 (2005)
^
Remove the disc brake caliper guide pin bolts, then the caliper from the disc brake adapter (Fig. 141).
^
Hang the caliper out of the way using a wire hanger or cord.
^
Remove the brake rotor from the rear hub and bearing.
20. Remove the dust cap from the rear hub and bearing.
21. Remove the hub and bearing retaining nut from the knuckle spindle, then remove the hub and bearing (Fig. 141).
22. On vehicles equipped with rear disc brakes, remove the upper return spring, both shoe hold-down clips, then spread the rear parking brake shoes
apart at the top enough to clear the shoe anchor and remove the parking brake shoes as an assembly from the disc brake adapter (Fig. 142).
23. To remove the rear parking brake cable from the brake support plate on vehicles equipped with rear drum brakes:
