PT Cruiser L4-2.4L Turbo VIN 8 (2005)
8. Install the master cylinder on the vehicle.
9. Remove the caps and connect refrigerant lines. Be certain the sealing O-rings are well lubricated with PAG oil and free of tears. Torque the
retaining fastener to 40 inch lbs.
10. Using a R-134a refrigerant recovery machine, evacuate and charge the refrigerant system.
11. Connect the negative (ground) cable on the battery.
WARNING: Be certain a firm brake pedal is achieved prior to attempting to operate the vehicle.
12. Road test the vehicle to ensure proper operation of the brakes.
