PT Cruiser L4-2.4L Turbo VIN 8 (2005)
4. Apply Mopar Gasket Maker to No. 1 and No. 6 bearing caps (Fig. 43). Install bearing caps and tighten M8 fasteners to 28 Nm (250 inch lbs.).
NOTE: Bearing end caps must be installed before seals can be installed.
5. Install camshaft oil seals.
6. Install camshaft target magnet and camshaft position sensor.
7. Install cylinder head cover.
8. Install timing belt rear cover and camshaft sprockets.
9. Install timing belt.
